The Production Process Of LED Flexible Strip

The Production Process Of LED Flexible Strip
The production process of LED flexible strip

Raw Material: LED, FPC, resistance, end cap, wire, glue ect.

Machine: Chip Mounter, Reflow Line, Oven, Electric Iron, Operation Line ect.

Accessories: Lead-free solder paste, solder

Production process:
1. Preheat: Put LED in oven to preheat LED for 4-8hours, detail preheat time depends on different LED

2. Scrape solder paste: Scrape solder paste on the solder pot of FPC

3. SMT: Pack LED to FPC

4. Reflow: Put half finished strip through Reflow and test. If OK, then pass them to production line

5. Solder: Sloder 0.5M to 5M Long, color body of FPC after test

6. Test: 100% low0voltage test for LED antistatic performance

7. Aging Test: Doing aging test for 8-12hrs

8. Glue: If need waterproof, then insert glue or use silicone tube according to customer requirement

9. Package: Put 5Meter to the reel, and put the product in to easy open bag.

10. Stock: Put finshed product into warehouse
The Production Process Of LED Flexible Strip